Lexmark X940e Service Manual page 130

7510
Error code or
message
284.03
Paper jam
284.05
Paper jam
285.00
Paper jam
286.00
Paper jam
287.00
Paper jam
287.01
Paper jam
287.05
Paper jam
288.00
Paper jam
288.01
Paper jam
288.04
Paper jam
289.00
Paper jam
289.01
Paper jam
289.02
Paper jam
289.03
Paper jam
2-16
Service Manual
Error contents
Sensor (lower media exit) lag
jam
Sensor (lower media exit)
static jam
Sensor (compiler media in)
lag jam
Sensor (compiler media in)
static jam
Sensor (upper media exit)
late jam
Sensor (upper media exit) lag
jam
Sensor (upper media exit)
static jam
Sensor (diverter gate) late
jam
Sensor (diverter gate) static
jam A (to top bin)
Sensor (diverter gate) static
jam B (to stacker bin)
Sensor (booklet media
entrance) late jam
Sensor (booklet media
entrance) lag jam
Sensor (booklet media
entrance) static jam
Sensor (booklet compiler in)
static jam
Description/Action
The media reached the sensor (lower media exit)
but did not clear it within the specified time.
Refer to the Finisher Service Manual.
Media remains on the sensor (lower media exit).
Refer to the Finisher Service Manual.
The media reached the sensor (lower media exit)
but did not clear it within the specified time.
Refer to the Finisher Service Manual.
Media remains on the sensor (compiler media in).
Refer to the Finisher Service Manual.
The media is late reaching the sensor (upper media
exit) within the specified time after reaching the
sensor (finisher media entrance).
Refer to the Finisher Service Manual.
The media reached the sensor (upper media exit)
but did not clear it within the specified time.
Refer to the Finisher Service Manual.
Media remains on the sensor (upper media exit).
Refer to the Finisher Service Manual.
The media is late reaching the sensor (diverter gate)
within the specified time after reaching the sensor
(bridge unit media exit).
Refer to the Finisher Service Manual.
The media reached the sensor (diverter gate) but
did not clear it within the specified time.
Refer to the Finisher Service Manual.
The media reached the sensor (diverter gate) but
did not clear it within the specified time.
Refer to the Finisher Service Manual.
The media is late reaching the sensor (booklet
media entrance) within the specified time after
reaching the sensor (bridge unit media exit).
Refer to the Finisher Service Manual.
The media reached the sensor (booklet media
entrance) but did not clear it within the specified
time.
Refer to the Finisher Service Manual.
Media remains on the sensor (diverter gate).
Refer to the Finisher Service Manual.
Media remains on the sensor (booklet compiler in).
Refer to the Finisher Service Manual.