Sensor (Registration) Late Jam (Feeding From The Mpf) - Lexmark X940e Service Manual

7510
Step
8
Check the tray module drive motor for proper
connection.
Is the above component properly connected?
9 Perform a print test.
Does the error continue?
10
Perform a print test.
Does the error continue?

250.00 Sensor (registration) late jam (feeding from the MPF)

Step
1 Check the media condition.
Is the media in the MPF tray crumpled or damaged?
2
Check the media size setup.
Does the media size in use match the size set for MPF tray?
3
Check the media position.
Does the media touch the sensor (registration)?
2-64
Service Manual
Check
Check
Yes
Replace the tray Replace the
module drive motor . connection.
Go to "2000-sheet
dual input
(TTM)–tray module
drive motor
assembly removal"
on page 4-203 or
"2000-sheet dual
input (TTM)–tray
module drive motor
assembly removal"
on page 4-203.
Replace the 1TM Problem solved.
controller card
assembly or the 3TM
controller card
assembly or the TTM
controller card
assembly.
"1X 500-
Go to
sheet drawer
(1TM)–1TM
controller card
assembly removal"
on page 4-252"3X
500-sheet drawer
(3TM)–3TM
controller card
assembly removal"
on page 4-231
or
"2000-sheet dual
input (TTM)–TTM
controller card
assembly removal"
on page 4-205.
Go to step 10.
Replace the lower Problem solved.
printer engine card
assembly.
"Lower
Go to
printer engine card
assembly removal"
on page 4-80.
Yes
Replace the media Go to step 2.
with new; ensure it
is dry.
Go to step 3. Replace the media
or change the
media size setup.
Remove the Go to step 4.
media.
No
No