Too Long Size Jam - Lexmark X940e Service Manual

Step
3
Check the sensor (sheet through) for proper connection.
Is the above component properly connected?
4
Check the sensor (ADF pre registration) for proper
operation.
1. Enter the Diagnostics Menu.
2. Touch SCANNER TESTS.
3. Touch Sensor Tests.
4. Touch ADF pre registration.
Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked?
5 Check the sensor (ADF pre-registration) for proper
connection.
Is the above component properly connected?
6 Place an undamaged document in the ADF, and perform a
ADF test.
Does the error remain?
7
Place an undamaged document in the ADF, and perform a
ADF test.
Does the error remain?

295.04 Too long size jam

Step
1 Check the document size.
Is the correct size document being inserted into the ADF?
Check
Check
Yes
Replace the Replace the
sensor (sheet connection.
through).
Go to "Sensor
(sheet through)
removal" on
page 4-158.
Go to step 6. Go to step 5.
Replace the Replace the
sensor (ADF pre- connection.
registration).
Go to "Sensor
(ADF pre-
registration)
removal" on
page 4-150.
Replace the ADF Problem solved.
controller card
assembly.
"ADF
Go to
controller card
assembly
removal" on
page 4-138.
Go to step 7.
Replace the RIP Problem solved.
card assembly.
Go to "RIP card
assembly
removal" on
page 4-73.
Yes
Go to step 2. Insert the proper
size document
into the ADF.
Diagnostic information
7510
No
No
2-107