Sensor (Tray 1 Feed-Out) Late Jam - Lexmark X940e Service Manual

Step
9
Check the duplex media inverter clutch for proper
operation.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Printer Motor Test.
4. Touch Registrat clutch.
Does the above component make an audible clicking
sound when activated?
10 Check the duplex media inverter clutch for proper
connection.
Is the registration clutch properly connected?
11 Perform a 2 sided print test.
Does the error remain?
12
Perform a 2 sided print test.
Does the error remain?

241.00 Sensor (tray 1 feed-out) late jam

Step
1 Check the media condition.
Is the media in the tray crumpled or damaged?
2 Check the media size setup.
Does the media size, in use, match the size set for tray 1?
Check
Caution: When performing motor tests,
ensure that all cover and door interlock
switches are overridden.
Check
Yes
Go to step 11. Go to step 10.
Replace the duplex Replace the
media inverter connection.
assembly.
"Duplex
Go to
media inverter
assembly removal"
on page 4-9.
Replace the duplex Problem solved.
controller card
assembly.
Go to "Duplex
controller card
assembly removal"
on page 4-14.
Go to step 12.
Replace the lower Problem solved.
printer engine card
assembly.
Go to "Lower
printer engine card
assembly removal"
on page 4-80.
Yes
Replace the Go to step 2.
damaged media
with new.
Go to step 3. Replace the
media, or change
the media size
setup.
Diagnostic information
7510
No
No
2-53