Mfp Sensors; Functions Of Main Components; Media Tray Assembly - Lexmark X940e Service Manual

MFP sensors

Sensor (standard
bin media full)
Sensor (fuser exit)
Sensor (media on belt)
Sensor (duplex wait)
MPF
Sensor (tray 1 feed out)
Sensor (tray 2 feed out)
Sensor (tray 3 feed out)
Sensor (tray 4 feed out)
Sensor (tray 2 feed out)
Sensor (tray 2 feed out)
Sensor (tray 3 feed out)
Sensor (tray 4 feed out)

Functions of main components

•

Media tray assembly

•
Media feed unit assembly
•
MPF
•
Xerographics
•
Transfer
•
Fuser
•
Drive
•
Electrical components and rolls
Media tray assembly
It is necessary to adjust the media tray rear guide and media tray end guide of the media tray assembly to match
the media size.
ADF and Scanner
Sensor (bridge
unit media exit)
Sensor (bridge unit
media entrance)
Fuser
Sensor (registration)
Tray 1
Tray 2
Tray 4
Tray 3
Tray 2
Tray 2
Tray 3
Tray 4
Sensor (diverter gate)
Sensor (upper
Sensor (finisher
media exit)
media entrance)
Sensor (booklet
media entrance)
Booklet maker unit
Sensor (booklet
(optional)
media exit)
Finisher
(optional)
TTM
1TM (optional)
3TM (optional)
7510
Sensor (upper
media bin full)
Sensor (lower
media exit)
Sensor (buffer path)
Sensor (compiler
media in)
1-7
General information