Lexmark X940e Service Manual page 121

Hide thumbs Also See for X940e:

Table of Contents

Unlock Device

This button appears on the screen when the MFP is locked. The

control panel buttons and shortcuts cannot be used while it appears,

and no default copy starts may occur.

To unlock the MFP:

1 Touch Unlock Device to open a PIN entry screen.

2. Enter the correct PIN to unlock the numeric keypad (0—9) and the

Backspace button on the control panel.

Note: If an invalid PIN is entered, Invalid PIN. appears. A pop-up

screen appears with the Continue button. Touch Continue. The home

screen returns with the Unlock Device button.

To open the Cancel Jobs screen. The Cancel Jobs screen shows any

of the following items under three headings on the screen which are

Print, Fax, and Network:

• e-mail send

Each heading has its own list of jobs shown in a column under the

heading. Each column can only show three jobs per screen. The job

appears as a button. If more than three jobs exist in a column, then the

down arrow appears at the bottom of the column. Each touch of the

down arrow accesses one job in the list. When more than three jobs

exist, once the fourth job in the list is reached, then an up arrow

appears at the top of the column. For illustrations of the up and down

arrow buttons, see <color>Information on touch-screen buttons.

Diagnostic information

Troubleshooting