In/Out Setup - Lexmark X940e Service Manual

7510
Step
8
Re-Perform the In/out setup.
1. Enter the Diagnostics Menu.
2. Touch ENGINE ADJUST.
3. Touch RegCon adjust
4. Touch Control setup cycles
5. Touch In/out setup
Does the above test pass?
9
Re-Perform the In/out setup.
1. Enter the Diagnostics Menu.
2. Touch ENGINE ADJUST.
3. Touch RegCon adjust
4. Touch Control setup cycles
5. Touch In/out setup
Does the above test pass?
4-268
Service Manual
Check Yes
Perform the Replace the image
Center setup. density sensor
assembly.
"In/out
See
setup" on See "Image
page 4-264. density sensor
assembly
removal" on
page
Perform the Contact next level
Center setup. of support.
"In/out
See
setup" on
page 4-264.
No
4-45.