Sensor (Pick Roll Position Hp) Removal - Lexmark X940e Service Manual

7510
Replacement note: Before reinstalling the rear bracket (E), replace any shims that were originally present.
F
C
D
A
F
E
B
Spring

Sensor (pick roll position HP) removal

1. Open the ADF left cover assembly.
"ADF left cover media guide removal" on page 4-144.
2. Remove the ADF left cover media guide. See
3. Disconnect the connector from the sensor (pick roll position HP) (A).
4. Release the hooks securing sensor (pick roll position HP) (A) to the ADF left cover assembly (B).
5. Remove the sensor (pick roll position HP) (A).
B
Connector
A
4-141
Repair information