Sensor (Cmy Transfer Roll Retract Hp) Late Error; Sensor (Cmy Transfer Roll Retract Hp) Lag Error - Lexmark X940e Service Manual

7510
Step
7
Perform a POR.
Does the error occur when the power is turned off/on?

904.05 Sensor (CMY transfer roll retract HP) late error

Step
1
Perform a POR.
Does the error occur when the power is turned off/on?
2 Replace the transfer belt unit assembly. Go to
belt unit assembly removal" on page
Does the error remain?

904.06 Sensor (CMY transfer roll retract HP) lag error

Step
1
Check the transfer belt unit assembly.
Is the above component properly installed?
2 Perform a POR.
Does the error occur when the power is turned off/on?
3
Replace the transfer belt unit assembly. Go to
belt unit assembly removal" on page
Does the error remain?
2-148
Service Manual
Check
Check
"Transfer
4-16.
Check
"Transfer
4-16.
Yes
Replace the lower Problem solved.
printer engine card
assembly.
Go to "Lower
printer engine
card assembly
removal" on
page 4-80.
Yes
Go to step 2. Perform several
print tests.
If the problem
remains, go to
step 2.
Replace the lower Problem solved.
printer engine card
assembly.
Go to "Lower
printer engine
card assembly
removal" on
page 4-80.
Yes
To to step 2 Properly reinstall
the transfer belt
unit assembly.
Go to step 3. Perform several
print tests.
If the problem
remains, go to
step 3.
Replace the lower Problem solved.
printer engine card
assembly.
Go to "Lower
printer engine
card assembly
removal" on
page 4-80.
No
No
No