Lexmark X940e Service Manual page 144

7510
Error code or
message
925.00
Service PC
cartridge
925.01
Service PC
cartridge
925.02
Service PC
cartridge
925.03
Service PC
cartridge
940.00
Service MPF
failure
941.00
Service tray 1
failure
941.01
Service tray 1
failure
942.00
Service tray 2
failure
942.01
Service tray 2
failure
2-30
Service Manual
Error contents
Sensor (Y ATC)
Sensor (M ATC)
Sensor (C ATC)
Sensor (K ATC)
MPF Tray 5 size sensing
error
Switch (media size) size
sensing error (tray 1)
sensor (media level) late
error (tray 1)
Switch (media size) size
sensing error (tray 2)
Sensor (media level) late
error (tray 2)
Description/Action
Outputs of the sensor (Y ATC) are not in the
specified range.
This error must be reset inside diagnostic mode
before troubleshooting or machine operation can
occur.
"925.00 Sensor (Y ATC) error" on
Go to
page 2-162.
Outputs of the sensor (M ATC) are not in the
specified range.
This error must be reset inside diagnostic mode
before troubleshooting or machine operation can
occur.
Go to "925.01 Sensor (M ATC) error" on
page 2-163.
Outputs of the sensor (C ATC) are not in the
specified range.
This error must be reset inside diagnostic mode
before troubleshooting or machine operation can
occur.
Go to "925.02 Sensor (C ATC) error" on
page 2-163.
Outputs of the sensor (K ATC) are not in the
specified range.
This error must be reset inside diagnostic mode
before troubleshooting or machine operation can
occur.
Go to "925.03 Sensor (K ATC) error" on
page 2-164.
The MPF size width sensor has failed.
"940.00 MPF tray 5 size sensing error" on
Go to
page 2-164.
The tray 1 switch (media size) detected an invalid
size setting.
"941.00 Switch (media size) size sensing
Go to
error (tray 1)" on page 2-165.
The sensing area of the sensor (media level) in the
media tray 1 is not interrupted within the specified
time after the lift tray has risen to operating level.
Go to "941.01 Sensor (media level) late error
(tray 1)" on page 2-166.
The tray 2 switch (media size) detected an invalid
size setting.
Go to "942.00 Switch (media size) size sensing
error (tray 2)" on page 2-167.
The sensing area of the sensor (media level) in the
media tray 2 is not interrupted within the specified
time after the lift tray has risen to operating level.
"942.01 Sensor (media level) late error
Go to
(tray 2)" on page 2-167.