1Tm, 3Tm Or Ttm Left Door Assembly Open - Lexmark X940e Service Manual

7510

1TM, 3TM or TTM left door assembly open

Step
1 Check the 1TM, 3TM or TTM left door for proper
operation.
Is the above component open and close properly?
2 Check the switch (tray module left door interlock) for
proper operation.
1. Enter the Diagnostics Menu.
2. Touch BASE SENSOR TEST.
3. Touch Cover and Door.
4. Touch Door D tray module left.
Does the display on the operator panel change every
time the actuator on the above switch is operated?
3 Check the switch (tray module left door interlock) for
proper connection.
Is the above switch properly connected?
4 Perform a POR.
Does the error continue when the power is turned off/
on?
2-180
Service Manual
Check Yes
Go to step 2. Replace the 1TM,
3TM or TTM left
door assembly.
Go to
sheet drawer
(1TM)–tray
module left door
assembly removal"
on page
500-sheet drawer
(3TM)–3TM left
door assembly
removal" on
page 4-229
"2000-sheet dual
input (TTM)–left
door assembly
removal" on
page
Go to step 4. Go to step 3.
Replace the switch Replace the
(tray module left connection.
door interlock).
Go to "1X 500-
sheet drawer
(1TM)–switch (tray
module left door
interlock) removal"
on page 4-251.
Replace the 1TM, Problem solved.
3TM, or TTM
controller card
assembly.
"1X 500-
Go to
sheet drawer
(1TM)–1TM
controller card
assembly removal"
on page 4-252, Go
"3X 500-sheet
to
drawer (3TM)–3TM
controller card
assembly removal"
on page 4-231, or
Go to "2000-sheet
dual input
(TTM)–TTM
controller card
assembly removal"
on page 4-205.
Go to step 5.
No
"1X 500-
4-250, "3X
or
4-200.