Motor Tests - Lexmark X940e Service Manual

7510

MOTOR TESTS

The tests in this group allow you to test specific motors, and on some motors run them forward or reverse.
To run the MOTOR TESTS:
1. Touch MOTOR TESTS from the Diagnostics Menu.
2. Touch the test to run.
The following Finisher Motor Tests are available:
• Motor (entrance/paddle)
• Motor (buffer/transport)
• Motor (exit)
• Fin diverter solenoid
• Sub paddle solenoid
• Media eject clutch
• Media eject clamp motor
• Media eject motor
• Fin Buffer solenoid
• Punch carriage shift motor
• Punch unit motor
• Front tamper motor
• Rear tamper motor
• Stapler carriage motor
• Stapler unit motor
•
The following Printer Motor Tests are available:
• Transfer belt steering motor
• CMY PC cartridge drive motor
• K PC cartridge drive motor
• Printhead polygon mirror motor
• Registration clutch
• Tray 1 media feed/lift motor
• Tray 2 media feed/lift motor
• Tray 3 media feed/lift motor
• Tray 4 feed/lift motor
• 2nd transport roll retract motor
• K developer transport drive motor
• MPF pick solenoid
• MPF transport drive motor
• Duplex drive motor
• Inverter clutch
• Duplex diverter gate solenoid
The following Scanner Motor Tests are available:
• ADF feed drv mtr
• Exposure lamp
• ADF registration drv mtr
• Scanner drv mtr
3. During the test, Motor Running... appears on the LCD.
Note: If available, Forward and Reverse options appear on the LCD for selected tests.
Press Stop
3-6
Service Manual
to stop the test.
• Stacker bin lift motor
• Booklet end guide drive motor
• Booklet paddle drive motor
• Booklet front tamper motor
• Booklet rear tamper motor
• Booklet folding/exit drive motor
• Booklet media entrance drive motor
• Booklet transport motor
• Booklet knife solenoid
• Booklet bin media transport motor
• Bridge unit diverter gate solenoid
• De-curler clutch
• Bridge unit transport drive motor
• Booklet diverter gate solenoid
• Booklet stapler motor
• Bridge unit bin media exit solenoid
• Transfer belt drive motor
• C toner add motor
• M toner add motor
• Y toner add motor
• K toner add motor
• CMY developer drive motor
• K developer clutch
• Fuser cooling fan
• Image density sensor shutter solenoid
• Tray module drive motor (TTM)
• TTM tray 4 media transport motor
• Waste toner auger motor
• Printhead shutter motor
• Standard exit shift motor
• K erase lamps
• CMY erase lamps
• Inverter solenoid
• Pick roll position mtr
• Scanner drive reverse
• Document set LED