7510
10. Remove the sensor (ADF angle) (A).
Scanner PS card assembly removal
1. Remove the platen cushion assembly. See
2. Remove the ADF unit assembly. See
3. Remove the scanner left cover. See
4. Remove the scanner right cover. See
5. Remove the scanner top rear cover assembly. See
6. Remove the two screws securing the scanner PS card assembly (A) to the machine.
7. Disconnect all the connectors from the scanner PS card assembly (A).
4-126
Service Manual
Connector
A
"Platen cushion removal" on page
"ADF unit assembly removal" on page
"Scanner left cover removal" on page
"Scanner right cover removal" on page
"Scanner top rear cover removal" on page
4-130.
4-129.
4-117.
4-118.
4-118.