Lexmark X940e Service Manual page 131

Error code or
message
289.04 Sensor (booklet media exit)
late jam
Paper jam
289.05 Sensor (booklet media exit)
lag jam
Paper jam
289.06 Sensor (booklet media exit)
static jam
Paper jam
290.00 Switch (sheet through) static
jam
Scanner jam
290.01 Sensor (sheet through) late
jam
Scanner jam
290.02 Sensor (ADF pre-registration)
late jam (side 1)
Scanner jam
290.03 Sensor (ADF pre-registration)
lag jam
Scanner jam
290.10 Sensor (ADF pre-registration)
static jam
Scanner jam
290.11 Sensor (ADF registration) late
jam (side 1)
Scanner jam
290.12 Sensor (ADF registration) late
jam (side 2)
Scanner jam
290.14 Sensor (ADF inverter) late
jam (Inverting)
Scanner jam
290.15 Sensor (ADF registration) lag
jam (inverting)
Scanner jam
Error contents Description/Action
The media is late reaching the sensor (booklet
media exit) within the specified time after the
booklet folding solenoid is turned on.
Refer to the Finisher Service Manual.
The media reached the sensor (booklet media exit)
but did not clear it within the specified time.
Refer to the Finisher Service Manual.
Media remains on the sensor (booklet media exit).
Refer to the Finisher Service Manual.
Media remains on the sensor (sheet through).
Go to "290.00 Switch (sheet through) static jam"
on page 2-66.
The media is late reaching the sensor (sheet
through) within the specified time after the ADF feed
drive motor assembly is turned on.
"290.01 Sensor (sheet through) late jam"
Go to
on page 2-67.
The media is late reaching the sensor (ADF pre-
registration) within the specified time after the ADF
feed drive motor assembly is turned on.
Go to "290.02 Sensor (ADF pre-registration) late
jam (side 1)" on page 2-69.
The media reached the sensor (ADF pre-
registration) but did not clear it within the specified
time.
"290.03 Sensor (ADF pre-registration) lag
Go to
jam" on page 2-70.
Media remains on the sensor (ADF pre-registration).
Go to "290.10 Sensor (ADF pre-registration)
static jam" on page 2-73.
The media is late reaching the sensor (ADF
registration) within the specified time after the ADF
feed drive motor assembly is turned on.
"290.11 Sensor (ADF registration) late jam
Go to
(side 1)" on page 2-74.
The media is late reaching the sensor (ADF
registration) within the specified time after reaching
the sensor (ADF pre-registration).
Go to "290.12 Sensor (ADF registration) late jam
(side 2)" on page 2-75.
The media is late reaching the sensor (ADF
inverter) within the specified time after reaching the
sensor (ADF registration).
"290.14 Sensor (ADF inverter) late jam
Go to
(Inverting)" on page 2-80.
The media reached the sensor (registration) but did
not clear it within the specified time.
"290.15 Sensor (ADF registration) lag jam
Go to
(inverting)" on page 2-82.
Diagnostic information
7510
2-17