Bypass Setting; Document Management Default Setting - Kyocera Mita KM-4530 Service Manual

2BC/D-1
Management code change
Changes the management code.
1. Select "Management code change" and press
the [Change #] key.
2. Enter the 4-digit management code using the
numeric keys and press the enter key.
Auto shutoff
Sets whether the auto shutoff function is
available.
1. Select "Auto shut-off" and press the [Change
#] key.
2. Select "On" or "Off".

(6) Bypass setting

Paper size and paper type settings
Sets the paper size and paper type for the
bypass settings.
When using special papers such as transparency,
cards, and postcards, be sure to set the paper
type to prevent faulty transfer and faulty fixing.
1. To enable the auto paper size detection,
press the [Auto Detection] key and select
"Centimeter" or "Inch".
To set a custom size, press the [Input size]
key and press the +/- keys to set the paper
size.
Setting range: Width: 3 7/8" - 11 5/8" (inch
specifications)
Length: 5 7/8" - 17"
Width: 98 - 297 mm (metric specifications)
Length: 148 - 432 mm
2. Press the [Select paper type] key.
3. Select the paper type.
4. Press the [Close] key.
Other standard size setting
Sets a special standard size.
1. Press the [Others standard] key.
2. Press the [Select size] key.
3. Select the paper size.
4. Press the [Close] key.
1-4-6

(7) Document management default setting

Document list print out
Prints out each job list.
1. Press the function key to print out the
document list you want.
Reset box
Prints out each job list.
1. Press the function key to delete all data you
don't want.
2. Press the [Yes] key.
Box name setting
Sets the name of synergy print box.
1. Press the [Box editting] key.
2. Select the desired box.
3. Press the [Change #] key.
4. Enter the box name.
5. Press the [End] key.
6. Press the [Yes] key.
7. Press the [Close] key.
8. Press the [Job cancel] key.
Box password setting
Sets the password for the synergy box.
1. Press the [Box editting] key.
2. Select the desired box.
3. Select "Password" and press the [Change #]
key.
4. Enter the password and press the [Close]
key.
5. Press the [Close] key.
6. Press the [Job cancel] key.
Box data deletion
Deletes the data in the synergy print box.
1. Press the [Box editting] key.
2. Select the desired box.
3. Press the [Reset Box] key.
4. Press the [Yes] key.
5. Press the [Close] key.
6. Press the [Job cancel] key.
Duration to save document data setting
Sets the duration to save the document data in
the synergy print box.
1. Press the [Document data saving term]
([Document data save period]) key.
2. Press the +/- keys to set the duration.
Setting range: 1 to 7 days
To save documents with no specific duration,
press the [Save without duration] key.
3. Press the [Close] key.