Kyocera Mita KM-4530 Service Manual page 228

2BC/D
9. Remove the four screws holding the mirror 1
upper frame and then the frame.
10. Remove the two screws holding each of the
front and rear wire retainers and then the
retainers from the mirror 1 lower frame.
11. Remove the mirror 1 lower frame from the
scanner unit.
Front wire retainer
12. Remove the round terminal of the scanner
wire from the scanner wire spring on the left
side of the scanner unit.
13. Remove the scanner wire.
1-6-24
Mirror 1 upper frame
Figure 1-6-45
Mirror 1 lower frame
Rear wire retainer
Scanner wire springs
Figure 1-6-46