Kyocera Mita KM-4530 Service Manual page 134

Maintenance
item No.
U355 Setting the output mode for face up output
Descrioption
Specifies whether to output from the first page so that the pages after the second page are stacked on the first
page or to output from the last page so that the first page is stacked at the top when outputting face up in
printing.
Purpose
Set according to the preference of the user.
Method
Press the start key. The screen for adjustment is displayed.
Setting
1. Select The selected item is displayed in reverse.
Display
FIRST PRINT
ORDER OF PAGE
Initial setting: FIRST PRINT
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
U402 Adjusting margins of image printing
Adjustment
See page 1-6-18.
U403 Adjusting margins for scanning an original on the contact glass
Adjustment
See page 1-6-38.
U404 Adjusting margins for scanning an original from the DF
Adjustment
See page 1-6-72.
U407 Adjusting the leading edge registration for memory image printing
Adjustment
See page 1-6-16.
Description
Description
To output from the first page
To output from the last page
2BC/D
1-4-65