Kyocera Mita KM-4530 Service Manual page 112

Maintenance
item No.
U235 2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.
U240 Checking the operation of the finisher
Description
Turns each motor, clutch and solenoid of the optional document finisher ON.
Purpose
Used to check the operation of each motor, clutch and solenoid of the optional document finisher.
Method
1. Press the start key. The screen for selecting an item will be displayed.
2. Select the motor, clutch or solenoid that you want to check the operation for. The selected item is displayed
in reverse and the operation starts.
Display
CONV MOTOR
PUNCH MOTOR
WID T MOTOR
WID U MOTOR
MTRAY MOTOR
JTRAY MOTOR
BRA A SOL
BRA B SOL
BRA C SOL
PUNCH P SOL
MTRAY SOL
EJEC SOL
PUNCH I SOL
MIDDLE SOL
DRAM CL
FEED IN CL
PUNCH CL
SADDLE ROL1
SADDLE ROL2
SADDLE BLD
SADDLE INI1
SADDLE INI2
SADDLE SOL
3. To turn ON a clutch or solenoid with the motor driving, press the interrupt key before selecting the clutch or
solenoid.
* The driving motor will start operation, and the selected clutch or the solenoid will remain ON until the
interrupt key is pressed again.
4. To stop motor driving, press the interrupt key again.
5. To return to the screen for selecting an item, press the stop/clear key with the motor stopped.
Completion
Press the stop/clear key when the operation stops. The screen for selecting a maintenance item No. is
displayed.
Description
Motors, clutches and solenoids
Paper conveying motor (PCM)
Punch motor (PUNM)
Front/rear upper side-registration guide motor (SRGM-FU/SRGM-RU)
Lower side-registration guide motor (SRGM-L)
Main tray elevation motor (MTEM)
Multi job tray elevation motor (MJTEM)
Feedshift solenoid A (FSSOLA)
Feedshift solenoid B (FSSOLB)
Feedshift solenoid C (FSSOLC)
Punch solenoid (PUNSOL)
Paper holder solenoid (PHSOL)
Eject guide solenoid (EGSOL)
Paper entry guide solenoid (PEGSOL)
Movable guide solenoid (MGSOL)
Siding drum clutch (SDCL)
Paper conveying clutch (PCCL)
Punch clutch (PUNCL)
Main motor (MM)
Main motor (MM)
Centerfold blade motor (SBLM)
Centering plate motor (CPM)
Side-registration guide motor (SRGM)
Pressure release solenoid (PRSOL)
2BC/D-1
1-4-45