Installing The Tandem Kit (Option) - Kyocera Mita KM-4530 Service Manual

1-3-8 Installing the tandem kit (option)

Preparation
1. Remove the two screws securing the middle
rear C cover and then the cover.
2. Remove the five screws securing the middle
rear cover and then the cover.
3. Remove the five screws securing the lower
rear cover and then the cover.
4. Remove the eleven screws securing the
upper and lower sequence covers and then
the covers.
5. Remove the two screws securing the
interface mounting plate and then the plate.
6. Remove the two screws securing the
interface cover and then the cover.
Middle rear
cover
Upper and lower
sequence covers
Interface cover
Middle rear C
cover
Lower rear
cover
Figure 1-3-70
Figure 1-3-71
Interface
mounting plat
Figure 1-3-72
2BC/D
1-3-33