Df Switches And Sensors - Kyocera Mita KM-4530 Service Manual

2BC/D

(7) DF switches and sensors

5
6
1. DF safety switch 1 (DFSSW1) ..................... Breaks the safety circuit when the DF is opened; resets original misfeed
2. DF safety switch 2 (DFSSW2) ..................... Breaks the safety circuit when the DF original switchback cover is
3. Original set switch (OSSW) ......................... Detects the presence of an original.
4. Original feed switch (OFSW) ....................... Detects primary original feed end timing.
5. Original switchback switch (OSBSW) .......... Detects an original misfeed in the original switchback section.
6. DF timing switch (DFTSW) .......................... Detects the original scanning timing.
7. Original size length switch (OSLSW) ........... Detects the length of the original.
8. Original size width switch (OSWSW) ........... Detects the width of the original.
2-2-8
y
2
3
4
8
Machine front Machine inside
Figure 2-2-7 DF switches and sensors
detection.
opened; resets original misfeed detection.
7
1
Machine rear