Kyocera Mita KM-4530 Service Manual page 129

2BC/D-1
Maintenance
item No.
U329 Default setting Auto rotation copy/Sort copy
Description
Sets the initial mode for the Auto rotation copy/Sort copy selected when auto clear is triggered or the reset key
is pressed.
Purpose
To be set as required according to the user.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be set.
Setting Auto rotation copy
1. Select ON or OFF.
Initial setting: ON
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Setting Sort copy
1. Select ON or OFF.
Initial setting: ON
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.
U330 Setting the number of sheets to enter stacking mode during sort operation
Description
Sets the number of copies at which copy ejection will be switched from the optional document finisher's sub
tray to its main tray when sorting is turned ON in the setting for the output mode under user simulation.
Purpose
To be set as required according to the number of copies the user makes.
Method
Press the start key. The current setting is displayed.
Setting
1. Change the setting using the cursor up/down keys.
Description
Number of copies to be ejected on the sub tray
2. Press the start key. The value is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
U331 Switching the paper ejection mode
Descrioption
Sets whether to eject copied sheets with the printed face facing up or down.
Purpose
To be set according to user request.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the ejection mode. The selected item is displayed in reverse.
Display
FACE UP
FACE DOWN
Initial setting: FACE UP
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
1-4-60
Description
Setting range
0 to 100 (sheets)
Description
Face-up ejection
Face-down ejection
Initial setting
100