Kyocera Mita KM-4530 Service Manual page 148

Section Jam code
Paper feed 24
section
25
26
27
28
29
30
31
Paper con- 32
veying
section
Fixing sec- 40
tion
Eject sec- 50
tion
51
Description
Multiple sheets in copier
vertical conveying sec-
tion 1
Multiple sheets in copier
vertical conveying sec-
tion
Multiple sheets in copier
vertical conveying sec-
tion 2
Multiple sheets in copier
vertical conveying sec-
tion 3
Multiple sheets in copier
vertical conveying sec-
tion 4
Multiple sheets in copier
vertical conveying sec-
tion 5
Multiple sheets in con-
verging section
Multiple sheets in deck
paper conveying section
Misfeed in registration/
transfer section
Misfeed in fixing section
Misfeed in eject section
Misfeed in face down
eject section
Conditions
Paper feed switch 2 (PFSW2) does not turn off within the
time required to convey the length of the used paper size
plus 1470 ms of turning on.
Paper feed switch 2 (PFSW2) does not turn off within 800 ms
of paper feed switch 3 (PFSW3) turning off.
Paper feed switch 2 (PFSW2) does not turn off by the previ-
ous paper within 1330 ms of duplex eject switch (DUPESW)
turning on.
Paper feed switch 3 (PFSW3) does not turn off within the
time required to convey the length of the used paper size
plus 1470 ms of turning on.
Paper feed switch 3 (PFSW3) does not turn off within 800 ms
of paper feed switch 4 (PFSW4) turning off.
Paper feed switch 4 (PFSW4) does not turn off within the
time required to convey the length of the used paper size
plus 1470 ms of turning on.
Paper feed switch 4 (PFSW4) does not turn off within 800 ms
of paper feed switch 5 (PFSW5) turning off.
Paper feed switch 5 (PFSW5) does not turn off within the
time required to convey the length of the used paper size
plus 1470 ms of turning on.
Paper feed switch 5 (PFSW5) does not turn off within 760 ms
of paper feed switch 6 (PFSW6) turning off.
Paper feed switch 6 (PFSW6) does not turn off within the
time required to convey the length of the used paper size
plus 1470 ms of turning on.
Paper feed switch 6 (PFSW6) does not turn off within 930 ms
of deck paper conveying switch 2 (DPCSW2) turning off.
Paper feed switch 1 (PFSW1) does not turn off within the
time required to convey the length of the used paper size
plus 2179 ms of turning on.
Paper feed switch 1 (PFSW1) does not turn off within 667 ms
of paper feed switch 2 (PFSW2) turning off.
Deck paper conveying switch 2 (DPCSW2) does not turn off
within the time required to convey the length of the used pa-
per size plus 1470 ms of turning on.
The registration switch (RSW) does not turn off within 670
ms of paper feed switch 1 (PFSW1) turning off.
The eject switch (ESW) does not turn on within 2260 ms of
the registration clutch (RCL) turning on.
Even if 2260 ms elapses after the registration clutch (RCL)
turns on, the OFF status of the eject switch (ESW) for the
preceding paper is not detected.
The eject switch (ESW) does not turn off within the time re-
quired to convey the length of the used paper size plus 2180
ms of turning on.
The face down eject switch (FDESW) does not turn off within
the time required to convey the length of the used paper size
plus 2180 ms of turning on.
2BC/D
1-5-5