Kyocera Mita KM-4530 Service Manual page 276

2BC/D-1
( 3 ) Adjusting the DF magnification
Adjust magnification in the auxiliary scanning direction if magnification is incorrect when the DF is used.
U053
(main scanning
(P. 1-4-20)
direction) (P.1-6-34)
Caution
Before making the following adjustment, ensure that the above adjustments have been made in maintenance mode.
Procedure
Enter maintenance mode.
Enter "070" using the numeric keys.
Press the start key.
Press the interrupt key.
Place an original on the DF
and make a test copy.
Is the image correct?
Press the stop/clear key to
exit maintenance mode.
1-6-68 1-6-72
U065
U065
(auxiliary scanning
direction) (P.1-6-35)
Start
For copy example 1, increase
the value using the cursor up key.
No
For copy example 2, decrease
the value using the cursor down key.
Yes
Setting range: –25 – +25
Initial setting: –1
Changing the value by 1 changes
the magnification by 0.1%.
Increasing the value makes
the image longer, and decreasing it
make the image shorter.
End
U070
Main scanning
direction
Auxiliary
scanning
direction
Original
Figure 1-6-125
Press the start key.
The new setting
is stored.
Copy Copy
example 1 example 2