Kyocera Mita KM-4530 Service Manual page 310

2BC/D
RSW
ESW
RCL
PFM
TC REM
SC REM
a When the start key is pressed, the paper feed motor (PFM) turns on, which starts paper feed.
b 166 ms after the image ready signal turns on, the registration clutch (RCL) turns on to start secondary paper feed.
c 155 ms and 220 ms after the registration clutch (RCL) turns on, the TC REM signal and the SC REM signal turn on
respectively and the transfer charging and the separation charging start respectively.
d 344 ms after the paper turns the registration switch (RSW) off, the TC REM and SC REM signals turn off to complete
transfer charging and separation charging.
2-1-28
166 ms
155 ms
Timing chart 2-1-8 Transfer/separation operation
86 ms
344 ms
220 ms