Kyocera Mita KM-4530 Service Manual page 154

Problem Causes/check procedures
(5) Check if paper feed clutch
A paper jam in the 4 malfunctions.
paper feed section
is indicated during
Electrical problem with pa-
copying (no paper
per feed clutch 4.
feed from copier
drawer 4).
Jam code 13
(6) Paper on the bypass table
A paper jam in the is extremely curled.
paper feed section
Check if the forwarding
is indicated during
pulley, upper or lower pa-
copying (no paper
per feed pulleys of the by-
feed from bypass).
pass are deformed.
Jam code 14
Broken paper feed switch
1 actuator.
Defective paper feed
switch 1.
Check if the bypass paper
feed clutch malfunctions.
Electrical problem with the
bypass paper feed clutch.
(7) Check if the side deck pa-
A paper jam in the per feed clutch malfunc-
paper feed section tions.
is indicated during
Electrical problem with the
copying (no paper
side deck paper feed
feed from side
clutch.
deck*). Jam code 15
(8) Broken deck paper con-
A paper jam in the veying switch 2 actuator.
paper feed section
Defective deck paper con-
is indicated during
veying switch 2.
copying (jam in deck
paper conveying
section).
Jam code 16/17 Broken paper feed switch
5 actuator.
Defective paper feed
switch 5.
Check if the deck feed
clutch malfunctions.
Electrical problem with the
deck feed clutch.
*Optional for 55 cpm copier only.
Corrective measures
Run maintenance item U032 and select paper feed clutch 4 on
the touch panel to be turned on and off. Check the status and
remedy if necessary.
Check (see page 1-5-46).
Change the paper.
Check visually and replace any deformed pulleys.
Check visually and replace paper feed switch 1 if its actuator is
broken.
Run maintenance item U031 and turn paper feed switch 1 on
and off manually. Replace paper feed switch 1 if indication of the
corresponding switch on the touch panel is not displayed in re-
verse.
Run maintenance item U032 and select the bypass paper feed
clutch on the touch panel to be turned on and off. Check the sta-
tus and remedy if necessary.
Check (see page 1-5-46).
Check and repair if necessary.
Check.
Check visually and replace deck paper conveying switch 2 if its
actuator is broken.
Run maintenance item U031 and turn deck paper conveying
switch 2 on and off manually. Replace deck paper conveying
switch 2 if indication of the corresponding switch on the touch
panel is not displayed in reverse.
Check visually and replace paper feed switch 5 if its actuator is
broken.
Run maintenance item U031 and turn paper feed switch 5 on
and off manually. Replace paper feed switch 5 if indication of the
corresponding switch on the touch panel is not displayed in re-
verse.
Run maintenance item U032 and select the deck feed clutch on
the touch panel to be turned on and off. Check the status and
remedy if necessary.
Check (see page 1-5-47).
2BC/D
1-5-11