Setting Envelopes - Kyocera Mita FS-9500DN Operation Manual

3
Insert the paper along the guides as far as it will go.
IMPORTANT
When loading paper into the MP tray, make sure that the print
side is facing upward. (The print side is the side facing upward
when the package is opened.) If the leading edge of the paper is
curled, straighten it out before loading the paper in the MP tray.

1.3 Setting Envelopes

When using the optional printer function, envelopes can be set
in the MP tray.
NOTE
The types of envelopes that can be used are Monarch, DL and
C5. Up to 6 envelopes can be loaded in the MP tray at a time.
1
Open the MP tray.
2
Align the insert guides with the envelope size.
Chapter 2 How to Load Paper
3
Open the flap of the envelope and set it with the copy
side facing upward. With the flap facing the outside, in-
sert the envelope into the slot along the insert guides
as far as it will go.
NOTE
Incorrectly loading envelopes can result in printing in the wrong
orientation or on the wrong side.
2-3