Installing The Multi/Simple Finisher (Option) - Kyocera Mita KM-4530 Service Manual

2BC/D

1-3-4 Installing the multi/simple finisher (option)

Preparation
1. Attach the paper insertion aid guide plate to
the left cover of the copier and lock down with
the two M4 × 10 tap-tight binding screws.
2. Attach the finisher connecting plate to the
copier left cover and then hold them together
with the two M4 × 12 binding screws.
3. Attach the connecting sponge to the finisher
by aligning the sponge to the upper end "a"
and front end "b" of the paper port of the
finisher.
1-3-18
Left cover
Paper insertion aid guide plate
Figure 1-3-34
Left cover
Figure 1-3-35
b
a
Figure 1-3-36
Finisher connecting plate
a
Connecting sponge