Kyocera Mita KM-4530 Service Manual page 126

Maintenance
item No.
U260 Changing the copy count timing
Description
Changes the copy count timing for the total counter and other counters.
Purpose
To be set according to user (copy service provider) request.
If a paper jam occurs frequently in the finisher when the number of copies is counted at the time of paper
ejection, copies are provided without copy counts. The copy service provider cannot charge for such copying.
To prevent this, the copy timing should be made earlier.
If a paper jam occurs frequently in the paper conveying or fixing sections when the number of copies is counted
before the paper reaches those sections, copying is charged without a copy being made. To prevent this, the
copy timing should be made later.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the copy count timing . The selected item is displayed in reverse.
Display
FEED
EJECT
Initial setting: EJECT
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
U263 Setting the paper ejection when copying from the DF
Description
Sets whether the copies will be ejected in the same or opposite order as the originals when copying from the
DF.
Purpose
Set according to the preference of the user.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the ejection order.
Display
FACE-DOWN (NOMAL)
FACE-UP (SPEED)
FACE-UP (MEMORY)
Initial setting: FACE-DOWN
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
Description
Description
When secondary paper feed starts
When the paper is ejected
Setting
Face down ejection
Face up ejection with bitmap copy
Face up ejection with memory copy
2BC/D-1
1-4-57