Kyocera Mita KM-4530 Service Manual page 216

2BC/D
• Removing the bypass lower paper feed pulley
12. Remove the two screws from the bypass
paper feed unit and then remove the bypass
lower paper feed pulley unit.
13. Remove the two stop rings and pull the joint
shaft in the direction of the arrow, and then
remove the bypass lower paper feed pulley.
14. Refit all the removed parts.
1-6-12
Figure 1-6-26
Bypass lower paper feed pulley
Stop ring
Stop ring
Figure 1-6-27
Bypass paper feed unit
Screws
Bypass lower paper
feed pulley unit
Joint shaft