Kyocera Mita KM-4530 Service Manual page 135

2BC/D-1
Maintenance
item No.
U504 Initializing the scanner NIC
Description
Initializing the optional scanner NIC to its factory default.
Purpose
To return to a setup at the time of factory shipments.
Method
1. Press the start key. The screen for executing is displayed.
2. Press EXECUTE on the touch panel. It is displayed in reverse.
3. Press the start key. All data in the scanner NIC is initialized.
Completion
To exit this maintenance item without executing initialization, press the stop/clear key. The screen for selecting
a maintenance item No. is displayed.
U505 Setting Data Base Assistant
Description
Sets whether or not the database linkage setting is enabled if an optional network scanner is installed.
Purpose
According to user request, changes the setting.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select ON or OFF. The selected item is displayed in reverse.
Display
ON
OFF
Initial setting: ON
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
U901 Checking/clearing copy counts by paper feed locations
Description
Displays or clears copy counts by paper feed locations.
Purpose
To check the time to replace consumable parts. Also to clear the counts after replacing the consumable parts.
Method
1. Press the start key. The counts by paper feed locations are displayed.
2. Change the screen using the cursor up/down keys.
Display
BYPASS
FIRST
SECOND
THIRD
FORTH
SIDE DECK
DUPLEX
When an optional paper feed device is not installed, the corresponding count is not displayed.
Clearing
1. Select the count to be cleared. The selected item is displayed in reverse.
To clear the counts for all paper feed locations, press the reset key.
2. Press the start key. The count is cleared. When clearing all counts, the screen for selecting a maintenance
item No. is displayed.
Completion
To exit this maintenance item without changing the count, press the stop/clear key. The screen for selecting a
maintenance item No. is displayed.
1-4-66
Description
Description
Database linkage setting is enabled.
Database linkage setting is disabled.
Paper feed locations
Bypass tray
Drawer 1
Drawer 2
Drawer 3
Drawer 4
Optional side deck (55 cpm copier only)
Duplex unit