Adjusting The Position Of The Isu - Kyocera Mita KM-4530 Service Manual

(6-2) Adjusting the position of the ISU

Caution
Before making the following adjustment, output a 1 dot-LINE PG pattern in maintenance item U089 to use as the original
for the adjustment.
Procedure
Place the original
on the contact glass.
Press the start key and make
a test copy at 100% magnification.
Is the image correct?
Start
No
Yes
End
Copy
Correct image
example 1
Figure 1-6-64
Refit the contact glass.
Remove the contact glass and adjust
the lateral squareness of the ISU by
rotating the pin.
For copy example 1, rotate the pin in
the direction of the black arrow (
For copy example 2, rotate the pin in
the direction of the white arrow (
Figure 1-6-65
2BC/D
Copy
example 2
).
).
Pin
1-6-33