Menu Selection System; Entering Mode Selection Menu; Selecting Menu; Setting Menu - Kyocera Mita Ecosys FS-6020 Operation Manual

Chapter 1 Using the Operator Panel

Menu Selection System

This section explains how to use the menu selection system. The MENU key on the operator panel allows you to use the menu to
set or change the printer environment such as the number of copies to print, emulation, etc., to your specific needs. Settings can
be made when Ready is indicated on the printer message display.
The printer obeys the most recently received printer settings sent from the application software, or from the printer driver, which
take priority over operator panel settings.

Entering Mode Selection Menu

Press the MENU key when Ready is indicated on the printer message display.
Mode selection menu is displayed.
Ready
PAR A4 PLAIN
Print
Menu Map
Print
Status Page
Paper Handling >

Selecting Menu

The mode selection menu is hierarchical. Press the
key to display desired menu.
•If the selected menu has sub-menu,
menu.
Paper Handling >
Press the key to move to the sub-menu or
back.
• is displayed before the sub-menu.
>
Indicates that this is sub-menu
>Cassette Size >
A4
Press the key to move to the another sub-menu or
to go back.
1-4
>Cassette Size >
Custom
>MP Tray Size
A4
or
is displayed after the
>
Indicates that there is
sub-menu
key to go
Indicates that there is
another sub-menu
key
>>Unit
mm
• is displayd before the second sub-menu.
>>
>>Unit
mm
Indicates that this is second sub-menu

Setting Menu

Select the desired menu and press the ENTER key to set or
change the configuration.
Press the or key to display desired item and the ENTER
key to finalize the value or selections set.

Cancelling Menu Selection

If you press the MENU key when selecting menu, the message
display returns to Ready.