Kyocera Mita KM-4530 Service Manual page 176

1-5-3 Image formation problems
(1) No image appears
(entirely white).
See page 1-5-33
(5) A white line appears
longitudinally.
See page 1-5-34
(9) Black dots appear on
the image.
See page 1-5-36
(13) Paper creases.
See page 1-5-37
(17) Image is out of focus.
See page 1-5-38
(2) No image appears
(entirely black).
See page 1-5-33
(6) A black line appears
longitudinally.
See page 1-5-35
(10) Image is blurred.
See page 1-5-36
(14) Offset occurs.
See page 1-5-37
(18) Image center does not
align with the original
center.
See page 1-5-38
(3) Image is too light.
See page 1-5-34
(7) A black line appears
laterally.
See page 1-5-35
(11) The leading edge of the
image is consistently
misaligned with the
original.
See page 1-5-36
(15) Image is partly missing.
See page 1-5-38
(19) Image is not square.
See page 1-5-39
2BC/D
(4) Background is visible.
See page 1-5-34
(8) One side of the copy
image is darker than
the other.
See page 1-5-35
(12) The leading edge of the
image is sporadically
misaligned with the
original.
See page 1-5-37
(16) Fixing is poor.
See page 1-5-38
(20) Image contrast is low
(carrier scattering).
See page 1-5-39
1-5-31