Kyocera Mita KM-4530 Service Manual page 227

5. Remove the two screws holding the slit glass
and then the glass.
6. Open the front cover and pull out the image
formation unit.
7. Remove four screws holding the operation
unit lower inner cover and then the cover.
8. Remove the five screws and disconnect the
three connectors, and then remove the
operation unit.
Slit glass
Figure 1-6-42
Operation unit lower inner cover
Figure 1-6-43
Operation unit
Connectors
Connector
Figure 1-6-44
2BC/D
1-6-23