Kyocera Mita KM-4530 Service Manual page 53

7. Reattach the paper feed section lower cover,
right rear lower cover and right front lower
cover.
8. Open the right cover and remove from the
copier by raising the cover in the direction of
the arrow.
9. Attach the upper merge guide with two M4 ×
8 TP-P tight screws.
Note: With the 55 cpm copier, be sure to use
the merge guide with "2BD" etched on it.
10. Attach the upper merge guide with two M4 ×
8 TP-P tight screws.
Right cover
Figure 1-3-51
Lower merge guide
M4 × 8 TP-P tight screws
Figure 1-3-52
Upper merge guide
M4 × 8 TP-P tight screws
Figure 1-3-53
2BC/D
1-3-25