Kyocera Mita KM-4530 Service Manual page 274

2BC/D-1
9. Open the registration guide and remove the
guide.
10. Remove the two screws holding the upper
feed guide plate and then the plate.
11. Remove the two screws holding the original
feed lift and then the lift.
12. Remove the screw holding the separation
guide and then the guide.
1-6-67-3 1-6-70
Registration guide
Upper original feed
guide plate
Figure 1-6-124-5
Screw
Separation guide
Original feed lift
Figure 1-6-124-6
Screw
Screw
Screw
Screw