Original Conveying Section - Kyocera Mita KM-4530 Service Manual

(3) Original conveying section

The original conveying section consists of the parts shown in Figure. Synchronized with the copier scanning operation,
the original is conveyed across the slit glass and ejected when scanning is complete.
In the double-sided original mode, the eject feedshift solenoid (EFSSOL) turns on, moving the eject feedshift guide to
switch the path of the original. When the scanning of the first face (reverse face) of the original is complete, the original is
conveyed to the original switchback section again.
1 Upper original conveying pulley
2 Upper original conveying roller
3 Lower original conveying roller
4 Front scanning pulley
5 Middle original conveying roller
6 Middle original conveying pulley
7 Eject pulley
8 Eject roller
Figure 2-1-46 Original conveying section
OCM
DFTSW
DFDPCB
Figure 2-1-47 Original conveying section block diagram
9 Original conveying guide
0 Eject feedshift guide
! Upper eject guide
@ Lower eject guide
# Slit glass (copier)
$ DF timing switch (DFTSW)
% Eject feedshift solenoid
(EFSSOL)
EFSSOL
2BC/D
2-1-41