Kyocera Mita KM-4530 Service Manual page 208

2BC/D
4. Remove the screw holding the interlock cover
and then the cover (only when detaching and
refitting the primary paper feed unit of drawer
1).
5. Remove the screw and then remove the
support plate and the confluence guide (only
when detaching and refitting the primary
paper feed unit of drawer 1 or 2).
6. Pull out the relevant drawer.
7. Remove the three screws and the 8-pin
connector and then remove the primary paper
feed unit from the right side of the main unit
of the machine.
1-6-4
Interlock cover
Figure 1-6-4
Support
plate
Figure 1-6-5
Primary paper feed unit
Figure 1-6-6
Confluence guide
Connector