Kyocera Mita KM-4530 Service Manual page 37

Adjusting the fixing pressure.
1. Remove the blue screw that secures the paper
conveying unit.
2. Pull out the paper conveying unit.
3. Open the eject cover.
4. Turn the fixing press nuts on the front and rear of
the fixing unit clockwise to adjust the fixing
pressure.
5. Close the eject cover.
6. Push the paper conveying unit into the machine
and raise the paper conveying unit release lever
to secure the unit.
Fixing press nut
Eject cover
Figure 1-3-20
Blue screw
Figure 1-3-19
Fixing press nut
2BC/D
Paper conveying unit
1-3-9