Kyocera Mita KM-4530 Service Manual page 165

Table of Contents

Advertisement

2BC/D
Code
Contents
1
C0420
Side deck*
communication problem
• An error code from the side deck is
detected eight times in succession.
No communication: there is no reply
after 3 retries.
Abnormal communication: a commu-
nication error (parity or checksum er-
ror) is detected five times in succes-
sion.
2
C0440
Finisher*
communication problem
• An error code from the side deck is
detected eight times in succession.
No communication: there is no reply
after 3 retries.
Abnormal communication: a commu-
nication error (parity or checksum er-
ror) is detected five times in succes-
sion.
C0610
Bitmap (DIMM) problem
• There is a problem with the data or
address bus of the bitmap DRAM.
C0630
DMA problem
• DMA transmission of compressed,
decompressed, rotated, relocated or
blanked-out image data does not
complete within the specified period
of time.
1-5-22
Causes
Check procedures/corrective measures
Poor contact in
Check the connection of connectors CN13
the connector ter-
on the main PCB and CN3 on the side
minals.
deck main PCB, and the continuity across
the connector terminals. Repair or replace
if necessary.
Defective main
Replace the main PCB and check for cor-
PCB.
rect operation.
Defective side
Replace the side deck main PCB and
deck main PCB.
check for correct operation.
Poor contact in
Check the connection of connectors CN24
the connector ter-
on the main PCB and CN2 on the finisher
minals.
main PCB, and the continuity across the
connector terminals. Repair or replace if
necessary.
Defective main
Replace the main PCB and check for cor-
PCB.
rect operation.
Defective finisher
Replace the finisher main PCB and check
for correct operation.
main PCB.
Defective main
Replace the main PCB and check for cor-
PCB.
rect operation.
DIMM installed
Check if the DIMM is inserted into the
incorrectly.
socket on the main PCB correctly.
Defective DIMM.
Replace the DIMM and check for correct
operation.
Defective main
Replace the main PCB and check for cor-
PCB.
rect operation.
*1: Optional for 55 cpm copier only. *2: Optional.
Remarks

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km-5530

Table of Contents