Kyocera Mita KM-4530 Service Manual page 111

2BC/D-1
Maintenance
item No.
U209 Setting date and time
Description
Sets the real time clock.
Purpose
To set the date and time after initializing data.
Method
1. Press the start key. The screen for executing is displayed. The current setting for the year is displayed.
2. Set the year (last two digits of the year) using the numeric or Up/Down keys and press the start key. For
years 2000 to 2009, enter only the last digit. The current setting for the month is displayed.
3. Set the month using the numeric or Up/Down keys and press the start key. The current setting for the date
is displayed.
4. Set the date using the numeric or Up/Down keys and press the start key. The current time setting for hours
is displayed.
5. Set the hours using the numeric or Up/Down keys and press the start key. The current time setting for
minutes is displayed.
6. Set the minutes using the numeric or Up/Down keys and press the start key. Setting is complete, and the
screen for selecting a maintenance item No. is displayed.
Supplement
To return to the last screen, press the stop/clear key while setting.
Completion
To stop this maintenance item without changing the current setting, press the stop/clear key at the screen for
the year setting. The screen for selecting a maintenance item No. is displayed.
U212 Setting the deck lift operation
Description
Sets the operation of the side deck (55 cpm copier only) lift motor for when paper in the optional side deck is
exhausted.
Purpose
To be set according to the paper loading method.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the method to load paper.
Display
SIDE FEED
UPPER FEED
Initial setting: SIDE FEED
2. Press the start key. The setting is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U235 Setting output tray initialize mode
Description
Sets whether or not initialization (shift of eject position to main tray) is performed when auto clear is triggered if
a multi-job tray is installed to an optional finisher.
Purpose
To be set as required according to the user.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the item to be set. The selected item is displayed in reverse.
Display
HP ON
HP OFF
Initial setting: HP ON
1-4-44
Description
Description
Load paper through the right cover
Load paper through the upper cover
Description
Job tray initialization is performed.
Job tray initialization is not performed.