Feedshift And Eject Sections - Kyocera Mita KM-4530 Service Manual

2-1-9 Feedshift and eject sections

The feedshift and eject sections switch the paper path based on the copy mode and eject paper or convey the paper to
the duplex section.
For duplex copy mode, the paper for which copying on the rear side has been completed is conveyed to the duplex
section by the feedshift section operation. After the conveyed paper is inverted, it is fed again for front side copying.
Figure 2-1-37 Feedshift and eject sections
EPCB
CN3-A2
FDESW
CN19-B6
CN3-A7
CN3-A8
CN3-A5
Figure 2-1-38 Feedshift and eject sections block diagram
1 Upper feedshift guide
2 Upper eject guide
3 Upper eject pulley
4 Eject roller
5 Feedshift guide
6 Lower left feedshift eject guide
7 Feedshift switch (FSSW)
8 Lower right feedshift roller
9 Lower right feedshift guide
0 Upper left feedshift roller
! Lower feedshift guide
@ Eject switch (ESW)
# Left middle feedshift guide
$ Right switchback guide
% Left switchback guide
^ Right switchback roller
& Left switchback roller
* Upper right switchback guide
( Face down eject switch
(FDESW)
) Eject pulley
⁄ Lower fixing eject roller
¤ Feedshift solenoid (FSSOL)
ESW
FSSOL
FSSW
2BC/D
2-1-33