Kyocera Mita KM-4530 Service Manual page 105

2BC/D
Maintenance
item No.
U157 Checking/clearing the developing drive time
Description
Displays the developing drive time for checking, clearing or changing a figure, which is used as a reference
when correcting the toner control. It is automatically cleared when U130 is executed.
Purpose
To check the developing drive time after replacing the developing unit.
Method
Press the start key. The screen for selecting an item is displayed.
Display
MAG TIME(M)
AGT TIME(M)
Clearing
1. Select the item to be cleared.
2. Press the reset key.
3. Press the start key. The drive time is cleared, and the screen for selecting a maintenance item No. is
displayed.
Setting
1. Select the item to be changed.
2. Enter a five-digit drive time (in minutes) using the numeric keys.
3. Press the start key. The drive time is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the drive time, press the stop/clear key. The screen for selecting
a maintenance item No. is displayed.
U158 Checking/clearing the developing count
Description
Displays the developing count for checking, clearing or changing a figure, which is used as a reference when
correcting the toner control. It is automatically cleared when U130 is executed.
Purpose
To check the developing count after replacing the developing unit.
Method
Press the start key. The developing count is displayed.
Clearing
1. Press the reset key.
2. Press the start key. The count is cleared, and the screen for selecting a maintenance item No. is displayed.
Setting
1. Enter a six-digit count using the numeric keys.
2. Press the start key. The count is cleared, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the count, press the stop/clear key. The screen for selecting a
maintenance item No. is displayed.
U160 Applying toner to the cleaning blade
Description
Applies toner to the cleaning blade.
Purpose
To apply toner to the drum to coat the cleaning blade. To be executed when replacing or cleaning the cleaning
blade or the drum.
Method
1. Press the start key. The screen for executing is displayed.
2. Press the start key. Operation starts.
When the operation is complete, the screen for selecting a maintenance item No. is displayed after open
and close the front cover.
Completion
To exit this maintenance item without performing operation, press the stop/clear key. The screen for selecting
a maintenance item No. is displayed.
1-4-38
Description
Description
Image formation motor drive time
Paper feed motor drive time