Kyocera Mita KM-4530 Service Manual page 50

2BC/D
12. Pull out the intermediate tray.
13. Remove the strip of fixing tape from the
release lever.
14. Raise the release lever to open the
intermediate tray, and then remove the four
strips of fixing tape.
15. Insert a stapler cartridge into each of the
staplers and of the intermediate tray. Press on
the cartridges until they are securely locked.
Note: With the simple finisher, attach just one
stapler cartridge to the stapler.
1-3-22
Release lever
Intermediate tray
Strip of fixing tape
Figure 1-3-43
Strips of fixing tape
Strips of fixing tape
Figure 1-3-44
Stapler
Intermediate tray
Stapler cartridge
Figure 1-3-45
Strips of fixing tape
Strips of fixing tape
Release lever
Intermediate tray
Stapler