Kyocera Mita KM-4530 Service Manual page 109

2BC/D
Maintenance
item No.
U203 Operating DF separately
Description
Simulates the original conveying operation separately in the DF.
Purpose
To check the DF.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Place an original in the DF if running this simulation with paper.
3. Select the item to be operated. The selected item is displayed in reverse and the operation starts.
Display
ADF
RADF
ADF (NON-P)
RADF (NON-P)
4. To stop continuous operation, press the stop/clear key.
Completion
Press the stop/clear key when the operation stops. The screen for selecting a maintenance item No. is
displayed.
U204 Setting the presence or absence of a key card or key counter
Description
Sets the presence or absence of the optional key card or key counter.
Purpose
To run this maintenance item if a key card or key counter is installed.
Method
Press the start key. The screen for selecting an item is displayed
Setting
1. Select the optional counter to be installed using the cursor up/down keys. The selected counter is
displayed in reverse.
Display
KEY-CARD
KEY-COUNTER
2. Press the start key. The setting is set and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
1-4-42
Description
Operation
With paper, single-sided original
With paper, double-sided original
Without paper, single-sided original (continuous operation)
Without paper, double-sided original (continuous operation)
Description
The key card is installed
The key counter is installed