Kyocera Mita KM-4530 Service Manual page 104

Maintenance
item No.
U156 Changing the toner control level
Description
Changes the toner control reference voltage set in maintenance item U130 or the toner control level or the
toner empty level to be determined by the difference from the toner control level. The setting for this
maintenance item does not need to be changed.
Purpose
To check the toner feed start level and toner empty level.
Method
Press the start key. The screen for selecting an item is displayed.
Display
TARGET
EMPTY
FIRST TARGET
Setting for the toner control level
1. Press the TARGET on the touch panel of the screen for selecting an item.
2. Change the setting using the cursor up/down keys.
Description
Toner control level
Increasing the setting makes the toner density lower.
3. Press the start key. The time is set.
Setting for the toner empty level
1. Press the EMPTY on the touch panel of the screen for selecting an item.
2. Change the setting using the cursor up/down keys.
Description
Difference between the toner control level
and the toner empty level
Increasing the setting makes the toner empty level higher: the toner density is lower when the toner empty
is detected.
3. Press the start key. The time is set.
Setting for the toner control reference voltage
1. Press the FIRST TARGET on the touch panel of the screen for selecting an item.
2. Change the setting using the cursor up/down keys.
Description
Toner control reference voltage
3. Press the start key. The time is set.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for maintenance item No. is displayed.
Description
Description
Toner control level
Difference between the toner control level and toner empty level
Toner control reference voltage for initial developer setting
Setting range
0 to 255
Setting range
0 to 255
Setting range
0 to 255
Initial setting
102
Initial setting
30
Initial setting
102
2BC/D
1-4-37