Paper Feed From The Bypass Table - Kyocera Mita KM-4530 Service Manual

(3) Paper feed from the bypass table

The bypass table holds up to 100 sheets of paper at one time.
the bypass solenoid (BYPSOL) turns on, unlocking the bypass stopper and lowering the bypass forwarding pulley until it
comes into contact with the paper. This conveys paper placed on the bypass table to the bypass upper and lower paper
feed pulleys, is primary paper fed by the rotation of the bypass forwarding pulley and is conveyed to the bypass upper
and lower paper feed pulleys.
Also during paper feed, the bypass lower paper feed pulley prevents multiple sheets from being fed at one time by the
torque limiter.
1 Upper bypass guide
2 Bypass upper paper feed pulley
3 Bypass paper switch (BYPPSW)
4 Bypass forwarding pulley
5 Bypass table
6 Bypass paper size length switch (BYPPLSW)
7 Bypass paper size width switch (BYPPWSW)
EPCB
CN9-B3
CN9-B8
CN9-B5
CN18-A6
CN3-B2
CN18-A1
CN18-A4
CN20-4
CN9-A6, A7, A8
CN9-A5
CN9-A2
Figure 2-1-13 Bypass paper feed section
RCL
RSW
FCL1-H
FCL1-L
Figure 2-1-14 Bypass paper feed section block diagram
8 Bypass lift guide
9 Lower bypass housing
0 Bypass lower paper feed pulley
! Bypass solenoid (BYPSOL)
@ Bypass tray switch (BYPTSW)
# Bypass stopper
BYP
SOL
BYPPLSW
BYP
PSW
BYP
PFCL
BYP
PWSW
PFSW1
2BC/D
BYPTSW
2-1-13