Kyocera Mita KM-4530 Service Manual page 378

2BC/D-1
Maintenance
Section
part/location
Duplex pressure release
Feedshift and
duplex sections solenoid
Rollers
Guides
Bushes
Maintenance
Section
part/location
DF section DF forwarding pulley
DF feed pulley
DF separation pulley
DF registration roller
Front reading pulley
DF registration pulley
Original feed switch
Lower original conveying
roller
Upper original conveying
roller
Upper original conveying
pulley
Original conveying guide
Original conveying pulley
cover
Middle original conveying
roller
Middle original conveying
pulley
Eject pulley
Original size length switch Clean
Covers
Original holder mat
Original holder sheet
Original size indicator
sponge
Maintenance
Section
part/location
Covers Covers
2-4-18 2-4-20
Method Maintenance cycle
Check or replace Every service
Clean Every service
Clean Every service
Check and grease Every service
Method Maintenance cycle
Replace or clean Every 100,000 counts
Replace or clean Every 100,000 counts
Replace or clean Every 100,000 counts
Clean Every service
Clean Every service
Check or clean Every service
Check or clean Every service
Clean Every service
Clean Every service
Check or clean Every service
Clean Every service
Clean Every service
Clean Every 400,000 counts
Clean Every 400,000 counts
Check or clean Every service
Every service
Clean Every service
Clean Every service
Clean Every service
Clean Every service
Method Maintenance cycle
Clean Every service
Points and cautions
Replace after feeding 500,000
sheets.
Clean with alcohol or a dry cloth.
Clean with alcohol or a dry cloth.
Check for unusual noise at the
roller section. If unusual noise
occurs, apply grease 1.
Points and cautions
Clean with alcohol when visiting
the user.
Clean with alcohol when visiting
the user.
Clean with alcohol when visiting
the user.
Clean with alcohol or a dry cloth.
Clean with alcohol or a dry cloth.
Clean with alcohol or a dry cloth
if it is dirty.
Clean with airbrush or a dry cloth.
Clean with alcohol or a dry cloth.
Clean with alcohol or a dry cloth.
Clean with alcohol or a dry cloth
if it is dirty.
Clean with alcohol or a dry cloth.
Clean the opposite side of the DF
timing switch with alcohol or a dry
cloth.
Clean with alcohol (Remove the
front, rear and right covers and
original conveying pulley mount
plate).
Clean with alcohol (Remove the
front, rear and right covers and
original conveying pulley mount
plate).
Clean with alcohol or a dry cloth
if it is dirty.
Clean with alcohol. Filter
Clean with alcohol.
Clean with alcohol or a dry cloth.
Clean with alcohol or a dry cloth.
Clean with alcohol or a dry cloth.
Points and cautions
Clean with alcohol or a dry cloth.
Page
Page
1-6-67
1-6-67
1-6-67-1
Page