Kyocera Mita KM-4530 Service Manual page 83

2BC/D-1
Maintenance
item No.
U032 Checking clutch operation
Description
Turns each clutch on.
Purpose
To check the operation of each clutch.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the clutch to be operated. The selected item is displayed in reverse, and the clutch turns on for 1 s.
Display
SB FEED
PF A
PF B
PF C
PF D
FEED B L
FEED B H
FEED C
FEED D
FEED E
FEED DK
FEED A L
FEED A H
RESIST
DUP FWD
DUP REV
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U033 Checking solenoid operation
Description
Turns each solenoid on.
Purpose
To check the operation of each solenoid.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the solenoid to be operated. The selected item is displayed in reverse, and the solenoid turns on for
1 s.
Display
BRANCH
DUP FS
DUP PR
SB SOL
FIX WEB SOL
MSW OFF
Select MAIN SW SOL to check the operation of the main switch in auto shut off.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U034 Setting paper timing
Adjustment
See pages 1-6-15 and 17.
1-4-18
Description
Clutches
Bypass paper feed clutch (BYPPFCL)
Paper feed clutch 1 (PFCL1)
Paper feed clutch 2 (PFCL2)
Paper feed clutch 3 (PFCL3)
Paper feed clutch 4 (PFCL4)
Feed low clutch 2 (FCL2-L)
Feed high clutch 2 (FCL2-H)
Feed clutch 3 (FCL3)
Feed clutch 4 (FCL4)
Feed clutch 5 (FCL5)
Deck feed clutch (DFCL)
Feed low clutch 1 (FCL1-L)
Feed high clutch 1 (FCL1-H)
Registration clutch (RCL)
Duplex forwarding clutch (DUPFWDCL)
Duplex reversing clutch (DUPREVCL)
Solenoids
Feed shift solenoid (FSSOL)
Duplex eject switching solenoid (DUPESSOL)
Duplex pressure release solenoid (DUPPRSOL)
Bypass solenoid (BYPSOL)
Fixing WEB solenoid (FWEBSOL)
Main switch turns on