Kyocera Mita KM-4530 Service Manual page 31

Removing the securing tape and the spacer.
1. Remove the piece of tape that secures the
bypass tray.
2. Remove the piece of tape that secures the right
cover.
3. Remove the two pieces of tape that secure the
right rear cover.
4. Remove the four pieces of tape that secure the
drawers.
5. Remove the piece of tape that secures the front
cover.
6. Open the front cover and remove the piece of
tape that secures the DF.
7. Pull out the duplex unit and remove the two
pieces of tape that secure the guide plates.
8. Pull out drawer 1 and drawer 2 and remove the
spacer and the two blue screws from each
drawer.
Tape
Tapes
Figure 1-3-2
Figure 1-3-3
Blue screw
Figure 1-3-4
2BC/D
Tape
Tapes
Tapes
Spacer
Blue screw
1-3-3